• Up next:Create CAM documentation for OP1

Module quiz

5 questions

1. Which 3D Adaptive Clearing option in the Passes tab controls how much material an endmill will engage while cutting?

Error: Select an answer

2. Which toolpath is typically only used for roughing operations?

Error: Select an answer

3. What kind of endmill has a flat bottom but a rounded edge profile?

Error: Select an answer

4. Where is the default cutting depth when an edge of a part is selected for a 2D Contour?

Error: Select an answer

5. If the Z depth of a cut is set to -1.0, the Radial Stock to Leave is set to .02 and the Axial Stock to Leave is set to .01, what is the final Z depth of the toolpath?

Error: Select an answer

Error: 5/5 questions unanswered
5/5 questions unanswered
  • Up next:Create CAM documentation for OP1

Welcome ${RESELLERNAME} Customers

Please opt-in to receive reseller support

I agree that Autodesk may share my name and email address with ${RESELLERNAME} so that ${RESELLERNAME} may provide installation support and send me marketing communications.  I understand that the Reseller will be the party responsible for how this data will be used and managed.

Email is required Entered email is invalid.

${RESELLERNAME}