• Fusion

Course 1 - Haas and Autodesk Fusion - Blueprints, CAD, CAM, and CNC

Outline
1

Getting started

Module overview
Overview
Get the software
Get the Haas tooling
Course resources
2

Introduction to blueprints

Module overview
Views and projections
Dimensions and tolerance
Title block information
GD & T symbols
Stock and work holding
Practice exercise
Challenge exercise
Module quiz
3

Creating a digital CAM setup

Module overview
Indicate a vise
Define stock and WCS
Review a program
Create CAM documentation
Practice exercise
Challenge exercise
Practice exercise
Module quiz
4

Setting up a CNC mill

Module overview
Tool and work offsets
Load an NC program into control
Dry run CNC program
Run CNC program
Inspect a part
Module quiz
5

Creating a CAM setup for a second operation

Module overview
Define stock and WCS for OP2
Review a program and create document
Practice exercise
Challenge exercise
Module quiz
6

Machining a part in soft jaws

Module overview
Set up and run OP2
Inspect operation 2
Module quiz
7

Course challenge exercise

Module overview
Course challenge
8

Final test

Module overview
Start your final test
  • Up next:Machining a part in soft jaws

Module quiz

5 questions

1. How can a toolpath be unsuppressed?

Error: Select an answer

2. When simulating stock removal, why is it bad practice to have stock left floating in the air?

Error: Select an answer

3. Which toolpath will use a trochoidal motion to maintain a constant chip load while removing material?

Error: Select an answer

4. Which setting during the creation of a new Setup will control the coordinate system reference used by a CNC machine once toolpaths are converted to G-code?

Error: Select an answer

5. Which file will contain the machine-readable code used to control a CNC Mill?

Error: Select an answer

Error: 5/5 questions unanswered
5/5 questions unanswered
  • Up next:Machining a part in soft jaws

Welcome ${RESELLERNAME} Customers

Please opt-in to receive reseller support

I agree that Autodesk may share my name and email address with ${RESELLERNAME} so that ${RESELLERNAME} may provide installation support and send me marketing communications.  I understand that the Reseller will be the party responsible for how this data will be used and managed.

Email is required Entered email is invalid.

No, thanks, I don't want support from ${RESELLERNAME}
${RESELLERNAME}