Generative Design for Manufacturing Expert Certification Prep

1. When using the Replace with Primitives tool in the Edit Model toolset, if the Selection is a sub-assembly of multiple components, what happens to the top-level subassembly component and all associated components?

The original component, along with its sub-components, is removed and replaced with a single component containing a single primitive body.
The original component’s sub-components and bodies are all hidden, and a single primitive body is added under the initially selected component.
A new component containing a single primitive body is added as a sub-component to the top-level of the initially selected component, while all other sub-components are hidden.
Several new components equivalent to the number of sub-components in the initially selected component are added under the top-level of the entire assembly.

Error: Select an answer

2. Which of the following statements describes the purpose of the Edit Model toolset in the Generative Design workspace?

Edit Model is only available for studies created in the Simulation workspace, not in Generative Design.
Edit Model enables users to create freeform Starting Shapes that will be the basis for the Generative Design solver to create its geometry.
Edit Model enables users to modify a design for a Generative Design study without making changes to the original design.
Edit Model allows a user to post-process Generative Design outcomes if they need further refinement after exporting.

Error: Select an answer

3. How are modifications made in the Edit Model toolset of the Generative Design workspace reflected in the Design Workspace?

Modifications are only local to the Generative Model in which they are made and are not seen in the original assembly.
Modifications to the Generative Model are only carried to the original assembly if a Connector Obstacle was created.
Modifications to the Generative Model are carried to the original assembly in the Design Workspace.
Modifications cannot be made in a Generative Design study, they must be made in the Design workspace prior to study setup.

Error: Select an answer

4. When setting up a Generative Design study, how are the locations of components in an assembly defined for the study?

The locations must be defined using the Press Pull tool in the Design workspace.
The locations must be defined using the Edit Form tool in the Form toolset.
Capture the position of the components in the Edit Model toolset.
Capture the position of the components in the Design workspace.

Error: Select an answer

5. What distinguishes obstacle geometry created using the Connector Obstacle feature in the Edit Model toolset of the Generative Design workspace from using Solid creation tools in Edit Model?

Connector Obstacle bodies are pre-selected as a Starting Shape.
Connector Obstacle bodies are pre-selected as obstacle geometry.
Connector Obstacle bodies have different material properties.
The workflows are identical.

Error: Select an answer

Error: 5/5 questions unanswered

5/5 questions unanswered

Getting started

About the certification

See where you stand

Required modeling knowledge

Generative design model preparation

Generative study setup

Generative study solve and outcomes

Course challenge exercise

Practice test

Module quiz

1. When using the Replace with Primitives tool in the Edit Model toolset, if the Selection is a sub-assembly of multiple components, what happens to the top-level subassembly component and all associated components?

2. Which of the following statements describes the purpose of the Edit Model toolset in the Generative Design workspace?

3. How are modifications made in the Edit Model toolset of the Generative Design workspace reflected in the Design Workspace?

4. When setting up a Generative Design study, how are the locations of components in an assembly defined for the study?

5. What distinguishes obstacle geometry created using the Connector Obstacle feature in the Edit Model toolset of the Generative Design workspace from using Solid creation tools in Edit Model?

Generative Design for Manufacturing Expert Certification Prep

Getting started

About the certification

See where you stand

Required modeling knowledge

Generative design model preparation

Generative study setup

Generative study solve and outcomes

Course challenge exercise

Practice test

Module quiz

1. When using the Replace with Primitives tool in the Edit Model toolset, if the Selection is a sub-assembly of multiple components, what happens to the top-level subassembly component and all associated components?

2. Which of the following statements describes the purpose of the Edit Model toolset in the Generative Design workspace?

3. How are modifications made in the Edit Model toolset of the Generative Design workspace reflected in the Design Workspace?

4. When setting up a Generative Design study, how are the locations of components in an assembly defined for the study?

5. What distinguishes obstacle geometry created using the Connector Obstacle feature in the Edit Model toolset of the Generative Design workspace from using Solid creation tools in Edit Model?

Welcome ${RESELLERNAME} Customers

Please opt-in to receive reseller support