• Fusion

Creating Toolpaths for a CNC Lathe

Outline
1

Getting started

Module overview
Course overview
Get the software
Course resources
2

Set up and cut a profile

Module overview
Create a CNC lathe setup
Create an external roughing toolpath
Create an external finishing toolpath
Machine internal geometry
Profile leads and transitions
Practice exercise
Challenge exercise
3

Internal and external grooving toolpaths

Module overview
Use the single groove toolpath in Fusion
Create a groove roughing toolpath
Create an internal groove roughing toolpath
Duplicate a toolpath
Practice exercise
Challenge exercise
4

Threading, chamfering, and C-axis operations for turning

Module overview
Cut chamfers with turning toolpaths
External threading
Drill and tap for turning
C-axis drilling
C-axis milling
Practice exercise
Challenge exercise
5

CNC lathe stock handling

Module overview
Review a CNC lathe setup
Parting a CNC lathe part
Multiple lathe spindles
Finishing a stock transfer
Practice exercise
Challenge exercise
6

Course challenge

Module overview
Course challenge
7

Practice test

Module overview
Start your practice test
  • Up next:C-axis drilling

Drill and tap for turning

0:00 / 0:00

Video quiz

1. What setting in a Drill operation can be used to control the distance a drill bit extends past the end of the selected hole?

Error: Select an answer

Error: 1/1 questions unanswered
1/1 questions unanswered

Step-by-step guide

It appears you don't have a PDF plugin for this browser.

  • Up next:C-axis drilling

Welcome ${RESELLERNAME} Customers

Please opt-in to receive reseller support

I agree that Autodesk may share my name and email address with ${RESELLERNAME} so that ${RESELLERNAME} may provide installation support and send me marketing communications.  I understand that the Reseller will be the party responsible for how this data will be used and managed.

Email is required Entered email is invalid.

No, thanks, I don't want support from ${RESELLERNAME}
${RESELLERNAME}